Do You Know the Racist History of the U.S. Dime?

There is a longstanding allegation that the FDR dime's designer, John Sinnock, copied the profile from a bronze bas relief created by sculptor Selma Burke. Luke Burgess sets the record straight. You are receiving this email because you subscribed to Energy and Capital. [Click here]( to manage your e-mail preferences. [Energy and Capital logo] Do You Know the Racist History of the U.S. Dime? [Luke Burgess Photo] By [Luke Burgess]( Written May. 07, 2018 Let's face it: Minorities have been royally screwed over in the past. They've gotten the shitty end of the stick for millennia. Here in the United States, black folks were once considered only three-fifths of a human being. Meanwhile, women have only been allowed to vote in 40% of American history. If I were a minority, I might be pissed off at the discriminatory nature of history myself. But we need to be very careful to keep our emotions over prejudice in check. And that's because the very facts of history are at stake. One story that perfectly shows how historical facts have been skewed by emotions over prejudice is that of the FDR dime. [75-Cent Miner to Surge 10,000% on Critical Announcement]( In the next few months, a critical announcement will reveal the biggest gold mine in America. And send the 75-cent miner that owns it surging for no less than 10,000% gains. For reasons you’ll see, its real gold windfall has been kept hidden from the public. But that’s about to change. You need to position yourself immediately. Click here for the full story.]( The FDR dime was introduced in 1946 to commemorate the passing of President Roosevelt, who died while in office just a year earlier. It replaced the mercury dime, which had been minted since 1916. At the time the FDR dime was introduced, there was quite a bit of controversy surrounding it. Among those controversies was an allegation that the dime's designer, John Sinnock, copied or borrowed the Roosevelt profile from a bronze bas relief of FDR created by African-American sculptor Selma Burke for the coin's obverse. Seen below, Burke's bas relief was sculpted in 1944 and unveiled in September 1945 at the Recorder of Deeds building in Washington, D.C., where it still hangs today. The exact origin of this claim is currently unknown to this writer. But whether or not it was Burke who first made the accusation, it's clear she was very unhappy with Sinnock and felt she deserved the credit for the design. In a special tribute to the sculptor presented to the 103rd Congress in 1994, writer Steven Litt reported: Selma Burke, 93, has earned more honors in her long career than many other 20th-century American artists. She first garnered attention as a sculptor in the Harlem Renaissance, the burst of art, music and literature by blacks in New York during the 1920s and '30s. She later studied in Europe, founded an art school in New York and an art center in Pittsburgh, and was awarded nearly a dozen honorary degrees. But one thing eludes her. It is credit for the portrait of Franklin D. Roosevelt that appears on the dime, which was issued by the U.S. Mint in 1946. The dime bears the tiny initials "JS," which stand for John Sinnock, the former mint chief engraver who, according to Burke, copied a bronze portrait plaque of Roosevelt created by Burke in 1944 for the Recorder of Deeds Office in Washington, D.C. “I'm so mad at that man,” she says of Sinnock. Officials at the mint say their records show Sinnock deserves full credit for the Roosevelt dime. But Burke isn't convinced. She says that because she is black, she will never get the recognition she feels she deserves. “This has happened to so many black people,'' she says. “I have never stopped fighting this man and have never had anyone who cared enough to give me the credit.” Litt continues: Burke and some scholars believe that Sinnock used her sketches and plaques to design the profile of Roosevelt that appears on the dime. But Brenda Gatling, public information officer for the mint, says "both Ms. Burke and Sinnock did live sittings with the president. Historical records do not bear out Ms. Burke's statements that he copied her design. Those who could have provided eyewitness accounts have long passed on." But Burke isn't discouraged. "Everybody knows I did it," she says. He Has Uncle Sam By the Balls The U.S. government is obligated to pay him $21 million every month for the next 10 years... But for him to maintain this special deal, he MUST pay out a sizable chunk of that money to folks like you and me... To the tune of an extra $20,620 a year! [Click here]( to discover how to start collecting these windfalls. In general, Burke's image of Roosevelt is quite similar to the one found on the dime. Both are left-facing profiles that have the same angle of cut on the neck. However, this is where the similarities end. A close look at both images reveals many subtle differences. Compare the two designs for yourself: Here are just a few differences I've noticed between Sinnock's Roosevelt profile and Burke's: - Burke's bas relief is proportionately different than the one found on the dime. - Burke's profile appears to portray a younger-looking Roosevelt than is on the dime. - Burke's image does not show Roosevelt directly from the side, as seen on the dime. Burke's bas relief shows a small bit of the right side of Roosevelt's face, the most obvious being the right eyebrow. - Roosevelt's left eyebrow on Burke's bas relief is also “bushier” and more pronounced. - The dime shows wrinkles radiating outward from the outer corner of Roosevelt's eye (crow's feet), while there are none on the Burke relief. - The forelock of Roosevelt hair is a bit rounder on the dime and extends forward from the hairline, whereas Burke's design has the hair “slicked back.” - The part in Roosevelt's hair is also different between the two images, and Burke's design shows Roosevelt with a much higher hairline. There are also clear differences in the way the hair falls on Roosevelt's head. - The back of the neck in Burke's design is much longer and generally shows Roosevelt's neck as thinner. - The earlobe on Burke's bas relief is much more pronounced than on the dime. - The curve of the nostril is much more pronounced than on the dime. - The chin on Burke's bas relief is much rounder and extends further from Roosevelt's face than on the dime. Also, Burke's profile does not feature a line on the chin as seen on the dime. Perhaps the most compelling evidence that Sinnock did not steal from Burke, however, is the fact that he had already created a few different inauguration medals featuring Roosevelt's profile dating back to 1933. The most notable for this argument is a medal designed by Sinnock for Roosevelt's third inauguration in 1941. The profile of FDR on the 1941 medal is a near copy of one of the initial design sketches Sinnock submitted to the Commission of Fine Arts for comments and approval of the Roosevelt dime obverse design. Compare these two for yourself: Based on these observations, it seems quite clear to me that Sinnock did not copy from Burke's bas relief for his profile of FDR on the dime. However, in doing some further research into the controversy, I was shocked to find so many who disagree. Some sources even go as far as to give Burke the entire credit without even mentioning Sinnock. Examples include Burke's obituary as it was printed in the Philadelphia Inquirer: Selma Hortense Burke, 94, of New Hope, the sculptor who created the profile of FDR used on the dime, died Tuesday at Chandler Hall, a nursing home and hospice in Newtown. The profile was taken from a bronze plaque she had made for a new federal building in Washington. The plaque, unveiled by President Harry S. Truman in 1945, was done from sketches made on butcher paper in a 45-minute session with President Franklin D. Roosevelt at the White House. She later sculpted that image into the profile on the dime. And her obituary in the Seattle Times: Selma Hortense Burke, the sculptor who created the profile of FDR used on the dime, died Tuesday at a nursing home and hospice near Philadelphia. She was 94. The profile was taken from a bronze plaque she had made for a new federal building in Washington. The plaque, unveiled by President Truman in 1945, was done from sketches made on butcher paper in a 45-minute session with President Franklin D. Roosevelt at the White House. Encyclopedia.com says: The source of Roosevelt’s image on the dime has recently received much attention. John R. Sinnock, the chief engraver at the U.S. Mint, has his initials on the profile. The dime’s head, however, is merely a mirror image of the plaque created by Selma Burke, with the exception of a few detail changes in the arrangement of Roosevelt’s hair. Moreover, the National Archives and Records Administration of the Franklin D. Roosevelt Library in Hyde Park, New York, stated that the dime portrait originated with the sculpture of Franklin Delano Roosevelt done by Selma Burke. Meanwhile, Encyclopedia.com does not even have an entry for John Sinnock. End Terrorism Without Firing a Shot This technology used to be the stuff of science fiction... But today, it stands to become terrorists' worst nightmare. A learning computer with a revolutionary scanning process that can tell apart dangerous objects (like guns, bombs, and knives) from everyday items (like watches, phones, and loose change). It can scan entire crowds in seconds without the need for gates, security lines, or personnel. [Find out what company developed this revolutionary artificial technology]( and how, within the next few years, it will sweep the globe. Okay, but many if not most of these examples were probably not researched and written by numismatists or experts, but rather people who were just basing their "facts" on what others have previously written. Surely an organization like the Smithsonian (which claims to be the world's largest museum and research complex) would have done a proper investigation into the matter. Right? Think again. With no mention of the controversy or Sinnock at all, the Smithsonian American Art Museum says of Burke in her biography: Sculptor and educator who received national recognition for her relief portrait of Franklin Delano Roosevelt, which was the model for his image on the dime. The fact is, claims that Sinnock copied Burke's work have been racially and politically motivated. The story that a white man working for the government stole from and uncredited an African-American female artist is an attractive anecdote for those looking to push their own agenda. It doesn't seem unrealistic to suggest that Sinnock used all of the resources available at the time to assist him with the design, which may or may not have included Burke's design. However, it would also seem that Sinnock would not have needed to copy or borrow from Burke, especially considering that he had already created several different profiles of FDR for medals well before Burke's bas relief. Seeing as Sinnock created his FDR profiles over a decade before Burke's work, one could also suggest that Burke used all available resources for the design of her bas relief, which may or may not have included Sinnock's medals. Ultimately, I do not see any hard evidence that Sinnock stole from Burke or vice versa. I believe the similarities between Sinnock's dime and Burke's bas relief are the result of two very talented artists creating realistic images of the same man. The argument over who deserves credit for the obverse design of the Roosevelt dime may never be officially resolved. There seems to be only one person who can say for sure, and that is John Sinnock himself. Unfortunately, Sinnock died shortly after the release of the Roosevelt dime following an illness of several months in 1947. Burke lived on, however, claiming she deserves credit for the dime's design until her death in 1995. This gave Burke almost 50 years to tell her side of the story without objection. As a result, the facts of history have been skewed. We need to be very careful to keep our emotions over prejudice in check, lest we believe lies. Until next time, [luke signature] Luke Burgess [[follow basic]@Lukemburgess on Twitter]( As an editor at [Energy and Capital](, Luke’s analysis and market research reaches hundreds of thousands of investors every day. Luke is also the investment director of Angel Publishing’s new Secret Stock Files newsletter, which helps investors leverage the future supply/demand imbalance that he believes could be key to a cyclical upswing in the hard asset markets. For more on Luke, go to his [editor’s page](. Enjoy reading this article? [Click here]( to like it and receive similar articles to read! Browse Our Archives [Is the GOP Doomed?]( [Ten Reasons for $100 Oil]( [Iran's Nuclear Lies: What Oil Investors Need to Know]( [Investing in The Green Organic Dutchman]( [Is the U.S. Dollar’s Bear Market Over?]( Related Articles [The U.S. Government & the Educated: Fools, Damn Fools]( [Is the U.S. Dollar’s Bear Market Over?]( [Ten Reasons for $100 Oil]( --------------------------------------------------------------- This email was sent to {EMAIL}. It is not our intention to send email to anyone who doesn't want it. If you're not sure why you've received this e-letter, or no longer wish to receive it, you may [unsubscribe here](, and view our privacy policy and information on how to manage your subscription. To ensure that you receive future issues of Energy and Capital, please add newsletter@energyandcapital.com to your address book or whitelist within your spam settings. For customer service questions or issues, please contact us for assistance. [Energy and Capital](, Copyright © 2018, [Angel Publishing LLC](. All rights reserved. 111 Market Place #720 Baltimore, MD 21202. The content of this site may not be redistributed without the express written consent of Angel Publishing. Individual editorials, articles and essays appearing on this site may be republished, but only with full attribution of both the author and Energy and Capital as well as a link to www.energyandcapital.com. Your privacy is important to us -- we will never rent or sell your e-mail or personal information. Please read our [Privacy Policy](. No statement or expression of opinion, or any other matter herein, directly or indirectly, is an offer or the solicitation of an offer to buy or sell the securities or financial instruments mentioned. While we believe the sources of information to be reliable, we in no way represent or guarantee the accuracy of the statements made herein. [Energy and Capital]( does not provide individual investment counseling, act as an investment advisor, or individually advocate the purchase or sale of any security or investment. The publisher, editors and consultants of Angel Publishing may actively trade in the investments discussed in this publication. They may have substantial positions in the securities recommended and may increase or decrease such positions without notice. Neither the publisher nor the editors are registered investment advisors. Subscribers should not view this publication as offering personalized legal or investment counseling. Investments recommended in this publication should be made only after consulting with your investment advisor and only after reviewing the prospectus or financial statements of the company in question.